DS 101: Proceedings of NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020
Balancing Innovation and operation

Year: 2020
Editor: Mortensen, N.H.; Hansen, C.T. and Deininger, M.
Series: NordDESIGN
Institution: Technical University of Denmark
DOI number: 10.35199/NORDDESIGN2020

Description

These years there are very tough requirements on industrial companies to launch more innovative products and services faster to the market and at the same time increase operation efficiency. On the innovation side key questions are related to e.g. true user experience, circularity, and implementation of electrification & digitalization of products. Concerning operations efficiency key questions are related to e.g. automation, modularization and manufacturing footprint. The way product and service development is executed very much influences both innovation and operation efficiency and is the overall topic of NordDesign 2020.

Table of Contents

• A practice-based approach to design education
  Sharma, Bhagyashri; Roy, Avik; Rautra, Priyabrata
• Development of a Circularity Impact and Failure Analysis: Obsolescence and Recyclability Integration
  Bertoni, Alessandro
• Dynamic updating of learning events during a course on the basis of logbooks
  Vanhatalo, Mikko; Juuti, Tero; Rättyä, Kaisu
• ETO Standardization Strategies: Verifying Implementation and Effect
  Bertram, Christian Alexander; Mueller, Georg Otto; Mortensen, Niels Henrik
• Normative Design for Society and Anticipatory Technology Development: A Double Challenge for Design Research
  Vermaas, Pieter; Stone, Taylor
• Packaging design strategies for introducing whole mealworms as human food
  Kauppi, Saara-Maria
• SHELTERING EMERGENCIES: Design development process of temporary housing in post-disaster settlement by community participation
  Dev, Kankana Narayan; Das, Amarendra Kumar
• Sustainability awareness in organizations through gamification and serious games: a systematic mapping
  Scurati, Giulia Wally; Ferrise, Francesco; Bertoni, Marco
• The Decision Arena: A model-centric interactive workspace for Product-Service System design
  Wall, Johan; Bertoni, Marco
• Understanding the product: Backtracking the QFD connections via the product structure
  Johansson, Roger
• Experience of a Co-creation Workshop with elderly people using natural semantic networks
  Briede Westermeyer, Juan Carlos; Leal Figueroa, Isabel; Vargas Callegari, Rodrigo; Ortega Bastidas, Javiera; Pérez Villalobos, Cristhian
• General Approach to support Modelling of Data and Information Flows in Product Development
  Mehlstäubl, Jan; Atzberger, Alexander; Paetzold, Kristin
• Modelling and designing of the system properties based on characteristics and the degree of maturity on the example of a high pressure storage system
  Duschek, Daniel; Michael Vielhaber, Michael
• Participatory Disaster Risk Reduction in Developing Countries
  Ramstad, Idun Sarre; Glesaaen, Peter Kristian; Keitsch, Martina
• Planning & Tracking the Changes - Matrix Mapping of Modular Product Family Generations
  Küchenhof, Jan; Schwede, Lea-Nadine; Krause, Dieter
• A Behavior-Centric Concept for Engineering Education in New Product Development
  Behrenbeck, Jan; Martins Pacheco, Nuno Miguel; Tariq, Bilal; Zimmermann, Markus
• A Framework for Grouping of Equipment for Preventive Maintenance Planning
  Soleymani, Iman; Sigsgaard, Kristoffer Vandrup; Khalid, Waqas; Hansen, Kasper Barslund; Mortensen, Niels Henrik
• A Mathematical Model of Customer Satisfaction depending on technical Design Parameters in the context of Product Generation Engineering
  Aksoy, Günseli; Huth, Tobias; Vietor, Thomas
• A Role-based Prototyping Approach for Human-Centred Design in Fuzzy Front-End Scenarios
  Martins Pacheco, Nuno Miguel; Behrenbeck, Jan; Tariq, Bilal; Vazhapilli Sureshbabu, Anand; Zimmermann, Markus
• Analysing increase of functionality and complexity in integrated product architectures
  Gonzalez Castro, Sabela; Panarotto, Massimo; Borgue, Olivia; Isaksson, Ola
• Approaches to analyzing multi-functional problems
  Svendsen, Nicklas Werge; Lenau, Torben Anker
• Automatic geometry alteration when designing for metal additive manufacturing
  Martinsson, Julian; Borgue, Olivia; Panarotto, Massimo; Isaksson, Ola
• Bringing Reality Back to Virtual Reality - A Collaborative Tool for Multidisciplinary Teams
  Kohtala, Sampsa; Kaland, Thomas; Jacobsen, Live; Aalto, Pasi; Steinert, Martin
• Comparison of Design Automation and Machine Learning algorithms for creation of easily modifiable splines
  Gustafsson, Erik Anton; Persson, Johan Alexander; Ölvander, Johan Rolf
• Comparison of three different heuristics for laser heat treatment pattern design
  Nordin, Axel
• Conceptual model of modularisation
  Pakkanen, Jarkko; Juuti, Tero; Lehtonen, Timo; Peltonen, Jari; Laine, Rami
• Data-Driven Engineering – Definitions and Insights from an Industrial Case Study for a New Approach in Technical Product Development
  Trauer, Jakob; Schweigert-Recksiek, Sebastian; Onuma Okamoto, Luis; Spreitzer, Karsten; Mörtl, Markus; Zimmermann, Markus
• Design thinking: guidelines for organizations
  Ishio, Pedro; Gaspar, Ricardo; Gon
• Designing aesthetics for play(fulness)
  Legaard, Jesper Falck
• Development of strategic guidelines for agile Parts Ma- turity Management of engine subsystems in the automotive industry during series ramp-up
  Rapp, Simon; Heimicke, Jonas; Weber, Jonas; Albers, Albert
• Effects and Interactions of agile Principles in the Process of Mechatronic System Development: Building a basic Un- derstanding for adaptive Process Design
  Albers, Albert; Heimicke, Jonas; Trost, Sebastian
• Evaluation of daylight performance of classroom spaces in ahmedabad
  Piparsania, Kratika Rajeev; Vaidya, Prasad; Kalita, Pratul Chandra
• Evaluation of Ideas in the Crowdsourcing process for product innovation
  Cortez Gomes, Joade; de Lima Silva, Técia; Nogueira Rêgo, Laíssa; de Oliveira Ferreira, Paula; Orestes Aguirre González, Mario
• Future-oriented product engineering through environment scenarios by using the example of future forms of mobility in urban living spaces
  Marthaler, Florian; Stehle, Simon; Siebe, Andreas; Albers, Albert
• How We (Sometimes Do Not) Evaluate Design Support: A Review of How Design Support Is Evaluated in Practice
  Hansen, Camilla Arndt; Özkil, Ali Gürcan
• Identifying modularity practices across mechanics, electronics and software
  Askhøj, Christoffer; Løkkegaard, Martin; Bertram, Christian Alexander; Mortensen, Niels Henrik
• Initiatives towards a concurrent maintenance process
  Sigsgaard, Kristoffer Vandrup; Agergaard, Julie Krogh; Mortensen, Niels Henrik; Hansen, Kasper Barslund; Soleymani, Iman; Khalid, Waqas
• Insights for touchscreen interface guidelines for medical devices: A case study of a usability test
  Nagarajan, Kamya; Silva, Arlindo; Lee, Hyowon
• Integration of low-cost, dry-comb EEG-electrodes with a standard electrode cap for multimodal signal acquisition during human experiments
  Erichsen, Christian Kuster; Dybvik, Henrikke; Steinert, Martin
• Interactive model-based decision-making tools in early product platform design
  Alonso Fernandez, I
• KPI-linked transformation process for digitized production through the systematic analysis and evaluation of trends
  Marthaler, Florian; Mertes, Thomas; Albers, Albert
• Making customer integration in company processes persistent: Comparison of literature and industrial perspective
  Vogel, Simone; Kreimeyer, Matthias; Richter, Ronny; Spinler, Stefan
• On How Designers Communicate the Functionality of Articulated Product Concepts in Sketches
  Ramana, G Kalyan; Onkar, Prasad S
• On the Treatment of Equality Constraints in Mechanical Systems Design Subject to Uncertainty
  Stumpf, Julian; Naumann, Thomas; Vogt, Marc Eric; Duddeck, Fabian; Zimmermann, Markus
• Participatory Design and Environmental Education in Visitor Centers: A Case Study from Nepal
  Hoang, Ninni Kim Nhi; Edvardsen, Mia; Keitsch, Martina
• Proposing a novel approach for testing complex medical task trainer prototypes
  Lilleløkken, Oscar; Ege, Daniel Nygård; Auflem, Marius; Steinert, Martin
• Research Data Management System for a large Collaborative Project
  Mozgova, Iryna; Koepler, Oliver; Kraft, Angelina; Lachmayer, Roland; Auer, Sören
• Reuse principle for primary packaging circularity in the food system
  Sæter, Frøydis; Alvarado, Isaac Ortega; Pettersen, Ida Nilstad
• Scrum Training for Product Configuration Systems Development
  Shafiee, Sara; Wautelet, Yves
• Service design and circular economy in the fashion industry
  Kongelf, Ingrid; Camacho-Otero, Juana
• The Crux of Integration Prototyping in Complex Environments
  Hjorth, Johan Chr. W.; Sjöman, Heikki; Steinert, Martin
• The hackathon format: an analysis of its possible interpretations under a service design perspective
  de Götzen, Amalia; Simeone, Luca; Saad-Sulonen, Joanna; Becermen, Begüm; Morelli, Nicola
• Understanding system features through information visualisations to improve product development: An exploratory study with data analysts
  Idrissov, Agzam; Škec, Stanko; Maier, Anja M.
• Unmanned autonomous vessels and the necessity of human-centred design
  Kristoffersen, Cecilie
• Fungal Future: A review of mycelium biocomposites as an ecological alternative insulation material
  Robertson, Owen; H
• Shaping wicked problem solvers: innovating educational programs through design thinking
  Johansson, Christian; Jagtap, Santosh; Bertoni, Marco; Bertoni, Alessandro; Wall, Johan
• A Design Specification Chain: A Concept for Improving Revision Management and Change Tracking
  Bertram, Christian Alexander; Rasmussen, Jeppe Bredahl; Mueller, Georg Otto; Mortensen, Niels Henrik
• Circular economy enabled by additive manufacturing: potential opportunities and key sustainability aspects
  Kravchenko, Mariia; Pigosso, Daniela C.A.; McAloone, Tim C.
• Cross-Industry Sectoral Study:Interactions and Challenges of Requirements Engineering in the Early Phase of Product Development
  Fahl, Joshua; Hirschter, Tobias; Maier, Hansj
• Engaging Digital Engineering Students in Design Thinking
  Traifeh, Hanadi; Nicolai, Claudia; Refaie, Reem; Meinel, Christoph
• Mass Distribution as an Approach for Designing Lightweight-Driven Product Architectures
  Laufer, Felix; Roth, Daniel; Binz, Hansgeorg